¡Retira GRATIS tus compras en nuestra tienda! Además, aprovecha miles de productos con Despacho Gratis AQUÍ
Resumen
Pago con transferencias
Transferencia y Banco Estado
$0
Otros medios de pago
Webpay/Onepay
$0
Envío
-
TOTAL
-

D-Link DES-1210-52 48 Puertos Fast Ethernet WebSmart Switch, including 2 Gigabit BASE-T an

Part number: DES-1210-52 / Cod: NA0000004650
D-LINK
Pago con transferencia
$337.520
Otros medios de pago
$352.710
Stock online
Stock en tienda
Estimar la fecha de envío
Despacho a domicilio o retiro en agencia
Retiro en tienda (solo R. Metropolitana)No disponible
Despachos a domicilio en todo Chile por medio de Starken, Bluexpress y Chilexpress
Compra online y retira GRATIS en nuestra tienda ubicada en la comuna de Providencia
Retira tu compra en más de 1.000 puntos de entrega disponibles en todo Chile
3 a 6 cuotas sin interés con Mercadopago
3 cuotas sin interés con cualquier banco a través de Transbank/Webpay
4 a 12 cuotas sin interés con tarjetas Santander a través de Transbank/Webpay
DescripciónEspecificaciones

 

FICHA TECNICA
 
PUERTOS  

48 Puertos 10/100 Mbps, 02 puertos 10/100/1000Base-T, 02 Puertos Combo 10/100/1000Base-T / 100/1000SFP

ESTÁNDARES

 

Cumple con las siguientes normas: 
IEEE 802.3 
IEEE 802.3u 
IEEE802.3ab 
IEEE 802.3z 
Soporta operación Half/Full-Duplex 
Auto-negotiation 
Soporta Auto MDI-X/MDI-II 
Soporta control de flujo de IEEE 802.3x

SFP TRANSCEIVERS S OPORTADOS

 

DEM-310GT (1000Base-LX, Single-mode, 10km) 
DEM-311GT (1000Base-SX, Mutli-mode, 550m) 
DEM-312GT2 (1000Base-SX, Multi-mode, 2km) 
DEM-314GT (1000BASE-LH, Single-mode, 50km) 
DEM-315GT (1000BASE-ZX, Single-mode, 80km) 
DEM-210 (Single Mode 100BASE-FX, 15Km) 
DEM-211 (Multi Mode 100BASE-FX, 2Km)

WDM TRANSCEIVERS SOPORTADOS  

DEM-330T/R (Gigabit WDM transceiver, Single-Mode 10km)
DEM-331T/R (Gigabit WDM transceiver, Single-Mode 40km)
DEM-220T (100Base-FX WDM transceiver, Single-mode, 20km) 
DEM-220R (100Base-FX WDM transceiver, Single-mode, 20km)

DDRII PARA CPU   64 MB
FLASH MEMORY  

16 MB

FORWARDING MODE   Store and Forward
SWITCHING CAPACITY   17.6 Gbps
MAX FORWARDING RATE  

13.1 Mpps

PACKET BUFFER MEMORY  

1 MB

FUNCIONES LAYER 2

 

MAC Address:

  • 8K Tabla de direcciones MAC
  • Soporta 256 MAC estáticas

Control de flujo:

  • Full duplex:802.3x
  • Full duplex: Back Pressure
  • Head-of-line blocking prevention

IGMP Snooping:

  • Soporta IGMP v1,v2
  • Soporta 256 IGMP snooping groups
  • Soporta por lo menos 64 static multicast address
  • IGMP Por VLAN
  • Soporta IGMP snooping querier (simple querier)

Spanning Tree:

  • 802.1D STP
  • 802.1w RSTP

Loopback Detection:

  • Desactiva el puerto automáticamente cuando detecta un loop.

802.3ad Link Aggregation:

  • Soporta máximo 8 grupos por dispositivo y 08 puertos por grupo.

Port Mirroring:

  • Mirroring support following mode:
  • Uno a uno
  • Varios a un puerto
  • Soporta Mirroring por Tx/Rx/Both

Diagnóstico de cable 
Force MDI / MDIX:

  • Selecciona el estado MDI / MDIX del puerto
Jumbo frame: No
VLAN  

Estándar 802.1Q 
VLAN Group:

  • 256 grupos de VLAN en total, Max 256 Grupos VLAN estáticos
  • VID Configurable de 1~4094

Management VLAN:

  • Soporta 01 VLAN de administración

Auto Voice VLAN:

  • Maximum user defined OUI is 10
  • Maximum default OUI is 8

Asymmetric VLAN

Auto Surveillance VLAN
MULTICAST FILTERING  

Soporta los siguientes modos (L2):

  • Forwards all unregistered groups
  • Filters all unregistered groups
ACL (ACCESS CONTROL LIST)  

Máximo número de Máscaras/Perfiles

  • Máximo 50 Perfiles
  • Soporta 240 reglas compartidas por todos los perfiles

ACL Policy Soporta los siguientes contenidos de paquetes en la política de lista de acceso:

  • MAC address
  • IPv4 address (ICMP/IGMP/TCP/UDP)
Acciones ACL: Permitir o Denegar
QOS (QUALITY OF SERVICE)  

Número de Colas de Prioridad: 04

  • Class 0 is Low queue
  • Class 1 is Middle queue
  • Class 2 is High queue
  • Class 3 is Highest queue

Soporta 802.1p: 
Cuatro colas de salida 
Soporta modo WRR en el manejo de colas 
Cuatro clases de mapeo para valor de 802.1p:

  • Class 0: 1,2
  • Class 1: 0,3
  • Class 2: 4,5
  • Class 3: 6,7

Manejo de colas:

  • Strict
  • Weighted Round Robin (WRR)

Bandwidth Control

  • Soporta control ancho de banda basado en puerto
  • Minimum granularity for 10/100Mbps ports: 64Kb/s
  • Minimum granularity for 10/100/1000Mbps ports: 1850Kb/s
  • Ingress / Egress bandwidth control

Class of Service:

  • 802.1p priority
  • DSCP
SEGURIDAD  

802.1X Port-based Access Control:

  • Default 802.1X forwarding

D-Link Safeguard Engine:

  • Protects CPU from Broadcast / Multicast / Unicast flooding

Port Security:

  • Soporta 64 direcciones MAC por puerto

Broadcast Storm Control:

  • Permite especificar umbrales en Kbps para todos los puertos.
  • Permite la detección de broadcast/multicast y tráfico desconocido unicast.
  • Min granularity : 64Kbps

Mac Estática:

  • Puede elegir entre Dynamic Forwarding Table (el máximo es 
    8K)
  • Puede ingresar manualmente MAC estáticas
  • Puede desactivar el auto learning
  • Soporta 256 entradas de MAC estáticas o superior
  • Only allows the packets with SA matched configured static Macs 

DHCP Server Screening 
Arp spoofing Prevention:

  • Entrada máxima 64

SSL:

Soporta v1/v2/v3
ADMINISTRACIÓN  

Web-based GUI: 
Compatible con los siguientes navegadores:

  • IE6/7 or later version
  • Netscape 8 or later version
  • Mozilla
  • Firefox 1.5/2.0 or later version

CLI: 
Soporta D-Link-like CLI 
Soporta comandos simples incluyendo las siguientes funciones:

  • Config account admin
  • Ping: Sends Echo message
  • Show Switch: Displays the device information
  • Save: Saves the device’s configurations
  • Configures IP Address
  • Shows IP interface
  • Upload & Download: Firmware or Configuration upgrade
  • over TFTP
  • Reset Config: Resets the device to factory default
  • Reboot: Power cycles the device
  • Logout: Logs out from current session
  • Password: Changes the user’s password
  • Debug info

Telnet Server: Máximo 04 conexiones, soporte IPv4 
TFTP client 
LLDP Pass-Through 
Configurable Auto MDI/MDIX:

  • Selects the MDI/MDIX status of port

SNMP:

  • Soporta v1/v2c/v3

SNMP Trap: Soporta los siguientes eventos:

  • Link state change
  • STP state change
  • SNMP authentication failure
  • System device boot up
  • Firmware upgrade state

SmartConsole Utility can receive the following trap events:

  • Link state change
  • STP state change
  • Illegal Web/CLI Login
  • System device boot up
  • Firmware upgrade state

System Log:

  • Max Log Entries is 500
  • Supports IPv4 log server

BootP/DHCP Client 
Time Setting: SNTP 
User Account: Maximum connection is 4 
Trusted Host: Trusted host number is 10 
Configuration File Upload/Download: Via HTTP/TFTP 
Firmware File Backup/Upgrade: Via HTTP/TFTP 
Save Configuration  Added in tool bar 
Save Log  Added in tool bar 
Reset Switch: Will reset all settings except IP address 
Reset System: Switch will be reset to its factory defaults and then reboot 
Reboot Device: System reboot 
Smart Wizard: Pop up setting page only at first time user login 
DHCP Auto-Configuration

OTHER  

Help Navigation Tab:

  • Online help

Links to local support web site 
Downloads User Guide 
IP por defecto: 10.90.90.90

Multi-language GUI: English, French, German, Spanish, Italian, Russian, Japanese, Traditional Chinese, Simplified Chinese.
MIB SOPORTADAS  

MIB II 
Bridge MIB 
SNMPv2 MIB 
MIB Traps Convention 
Interface Group MIB 
Private MIB

PROTOCOLOS SOPORTADOS  

RFC 768 UDP 
RFC 783 TFTP Client 
RFC 791 IP 
RFC 792 ICMP 
RFC 793 TCP 
RFC 826 ARP 
RFC 854 Telnet Server 
RFC 855 Telnet Server 
RFC 856 Telnet Binary Transmission 
RFC 858 Telnet Server 
RFC 896 Congestion Control in TCP/IP Network
RFC 903 Reverse Address Resolution Protocol 
RFC 951 BootP Client 
RFC 1155 MIB 
RFC 1157 SNMP v1 
RFC 1191 Path MTU Discovery 
RFC 1212 Concise MIB Definition 
RFC 1213 MIB II, IF MIB 
RFC 1215 Traps for use with the SNMP 
RFC 1239 Standard MIB 
 RFC 1350 TFTP 
 RFC 1493 Bridge MIB 
 RFC 1519 CIDR 
RFC 1542 BootP/DHCO Client 
 RFC 1945 HTTP/1.0 
 RFC 2131 DHCP 
 RFC 2132 DHCP Options and BOOTP Vendor Extensions 
 RFC 2138 Radius Authentication 
 RFC 2233 Interface MIB 
RFC 2570, 2575 SNMP 
 RFC 2578 Structure of Management Information 
Version 2 (SMIv2) 
 RFC 2647 802.1p 
 RFC 3416 SNMP 
 RFC 3417 SNMP

CARACTERÍSTICAS FÍSICAS  

 

INDICADORES DE LEDS  

Power 
Fan Err(option) 
Link/Act/Speed

FUENTE DE ALIMENTACIÓN  

Internal universal power supply 
AC Input: 0.496A@115V,0.272A@230V

LED’S  

Por Dispositivo:

  • Power

Puerto 10/100 Mbps:

  • Link
  • Act
  • Speed

Puerto 10/100/1000 Mbps:

  • Link
  • Act
  • Speed

Puerto SFP:

  • Link
  • Act
  • Speed
CONSUMO   

Máximo: 28.9  Watts 
Stanby: 13.2W/110V, 13.3W/240V

DISIPACIÓN DE CALOR  

98.61 BTU/hr

MTBF   289.012 Hrs
ACÚSTICO  

0 dB (A)

NÚMERO DE VENTILADORES   0
 
Performance
Tiempo medio entre fallos289012h
Memoria intermedia de paquetes1 MB
ApilableNo
Diseño
SeguridadcUL, LVD
Factor de forma1U
Color del productoNegro
Montaje en rackSi
Transmisión de datos
Tasa de transferencia (máx)1 Gbit/s
Número de VLANs256
Guardar y remitirSi
Capacidad de conmutación17,6 Gbit/s
Tasas de transferencia soportadas10/100/1000 Mbps
Tabla de direcciones MAC8000 entradas
Seguridad
Lista de Control de Acceso (ACL)Si
Red
Soporte 10GNo
Spanning Tree ProtocolSi
IGMPSi
Auto MDI / MDI-XSi
DHCP, clienteSi
Control de transmisión de tormentasSi
Adición de vínculosSi
Espejeo de puertosSi
Soporte de control de flujoSi
Full duplexSi
Estándares de redIEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Puertos e Interfaces
Gigabit Ethernet (cobre), cantidad de puertos2
Tecnología de cableado ethernet de cobre1000BASE-T, 100BASE-TX, 10BASE-T
Cantidad de puertos SFP/SFP+2
Cantidad de puertos básicos de conmutación RJ-45 Ethernet52, 48, 52
Características de administración
Administación basada en webSi
Multidifusión, soporteSi
Calidad de servicio (QoS) soporteSi
MIB, soporteMIB II, Bridge MIB, SNMPv2 MIB, MIB Traps Convention, Interface Group MIB, Private MIB
Tipo de interruptorGestionado
Capa del interruptorL2
Condiciones ambientales
Intervalo de temperatura de almacenaje-10 - 70 °C
Intervalo de temperatura operativa0 - 40 °C
Disipación del calor98,61 BTU/h
Intervalo de humedad relativa para funcionamiento10 - 95%
Intervalo de humedad relativa durante almacenaje5 - 95%
Alimentación a través de Ethernet (PoE)
Energía sobre Ethernet (PoE), soporteNo
Control de energía
Consumo energético28,9W
Voltaje de entrada100 - 240V
Otras características
Emisiones electromagnéticasFCC Class A, CE Class A, VCCI Class A, C-Tick
Frecuencia de entrada50/60 Hz
LEDs de conectividadY
Gestión de rendimientoTelnet, Telnet Server, TFTP Client, SNMP v1/v2/v3, SNMP Trap
Velocidad de transferencia (paquete)3.1 Mpps
Tecnología de conectividadAlámbrico
Peso y dimensiones
Peso3,3 kg
Altura4,4 cm
Profundidad25 cm
Ancho44,1 cm
© 2000-2024 | SP Digital.cl Todos los derechos reservados | Desarrollado con 💚 por la gran familia SP